-------------------------------------------------------------------------------------------------- Non-Contact Tonometer HNT-1/1P 29
4. Repair Standard
4-1. Checking and Control
4-1-1. Engineer Setup Mode
Turn on HNT-1/1P and pressing
PRINT button -> R button -> L button -> Setup button
until the measure mode screen is displayed. Then you could enter the engineer setup
mode.
When you touch any item in the screen of Engineer Setup Mode, Engineering setup
menus are the followings.
(1)
Dead Pixel Correction
- Check the dead pixel information of cameras.
(2)
Solenoid Control
- Setup solenoid puffing time and power
(3)
Focus Led Setup
- Setup focus LED brightness.
(4)
IOP Measure Setup
- Setup IOP model eyes.
(5)
Track Motor Setup
- Setup track motor PWM and minimal distance.
(6)
Target Dist Setup
- Setup target distance.
(7)
Pachy Measure Setup(only HNT-1P)
- Setup Pachymetry model eyes.
