manualshive.com logo in svg

Hussmann RL2SP, Installation & Operation Manual

The Hussmann RL2SP Installation & Operation Manual is a comprehensive guide that provides essential information for setting up and operating your Hussmann RL2SP unit. This manual is available for free download on our website, allowing you to access it anytime, anywhere. Get your manual now from manualshive.com and ensure optimal performance of your Hussmann RL2SP product.

Share
Download
background image

Table of Contents

ANSI Z535.5 DEFINITIONS

 ...................v

INSTALLATION TOOL LIST

 ................v

INSTALLATION

UL Listing ..................................................... 1-1
Federal / State Regulations. ............................. 1-1
Location  ....................................................... 1-1
Shipping Damage  ........................................... 1-1
Exterior Loading  ........................................... 1-2
Merchandisers Shipped With End Installed ......... 1-2
Shipping Braces  ............................................. 1-2
Door Adjustment ............................................ 1-4
Installing Splashguard Brackets  ....................... 1-4
Joining  ......................................................... 1-4
Joining Instructions  ....................................... 1-5
Installing Bumpers ........................................ 1-17

ELECTRICAL / CONTROLLER /  
WATER / REFRIGERATION

Electrical ....................................................... 2-1
Merchandiser Electrical Data ........................... 2-1
Field Wiring .................................................. 2-1
Main Disconnect Switch  .................................. 2-1
Plug  ............................................................. 2-2
Case Electronic Controller  .............................. 2-3
Connecting Device  ....................................... 2-10
Controller Troubleshooting ............................2-12
Water - (For Condensers) ................................2-13
Pre-Installation System Cleaning  ................... 2-15
Refrigeration  ............................................... 2-16
Condensing Unit Access  ................................ 2-16
Defrost ........................................................ 2-17

DRIP PIPING AND SPLASHGUARDS

Waste Outlet and Water Seal ............................ 3-1
Installing Drip Piping ..................................... 3-1
Drip Piping Lineup Arrangements  ................... 3-4
Installing Splashguards  ................................... 3-5
Sealing Splashguard to Floor ........................... 3-6

START UP / OPERATION

Prior to Start-up Check List   ............................ 4-1
12 Hours After Startup Checklist ....................... 4-2
Startup and Operation ...................................... 4-3
Stocking  ........................................................ 4-3
Load Limits .................................................... 4-3
Installing FDA/NSF Required Thermometer  ...... 4-5

MAINTENANCE

Care and Cleaning ............................................ 5-1
Cleaning Honeycomb Assemblies ........................ 5-2
Cleaning Stainless Steel Surfaces .........................5-3
Cleaning Coils ..................................................5-3
Cleaning Under Merchandisers  ......................... 5-3
Removing Scratches from Bumper ...................... 5-3

SERVICE

Replacing Fan Motors and Blades ...................... 6-1
Replacing Electric Defrost Heaters  .................... 6-2
Replacing Drain Pan Heater  ............................. 6-3
Servicing Vertical Lighting  .............................. 6-4
Servicing Doors and Frames  ............................. 6-4
Replacing Door or Door Frame Parts  ................ 6-4
Replacing Damaged Drain Fitting ..................... 6-4
Repairing Aluminum Coils  ............................... 6-5

WARRANTY

vi

 

P/N 3053328_C

U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • WWW.HUSSMANN.COM

Summary of Contents for RL2SP


































































Reviews:

No comments

Related manuals for RL2SP

Hussmann RGDC Technical Data Sheet preview
RGDC
Brand: Hussmann Pages: 6
Hussmann SPECIALITY VR3-D/B-12-R User Manual preview
SPECIALITY VR3-D/B-12-R
Brand: Hussmann Pages: 36
Hussmann M1XD-GEP Technical Data Sheet preview
M1XD-GEP
Brand: Hussmann Pages: 5
Hussmann M1XLD-GE Technical Data Sheet preview
M1XLD-GE
Brand: Hussmann Pages: 7
Hussmann Impact Excel M5X-GEP Technical Data Sheet preview
Impact Excel M5X-GEP
Brand: Hussmann Pages: 8
Star Manufacturing Hot Food Merchandiser 18MCP Specification Sheet preview
Hot Food Merchandiser 18MCP
Brand: Star Manufacturing Pages: 2

Brands by name

Popular brands

Load more brands