SELF-CONTAINED CASE
Safe-NET components are factory-installed. Once power
is supplied to the case as specified in the case’s installation
and service manual, Safe-NET settings are ready to be
selected.
Settings are retained when power is interrupted. Thus, a
self-contained case can be moved without re-entering
selected settings.
Startup of a new Self-Contained case is quite simple:
1. Verify case type selected.
2. Set the clock.
3. Check or set the temperature setpoint.
THREE BUTTON RULES
• Always start by pushing the
SELECT
button, watch
what is displayed. Which menu are you in?
— StUP — CLOC — DEFr — tEM — VALv —
DiSP — and cycles back to StUP
• Press the
SELECT
button until you are in the proper
menu. Once in the proper menu press the
UP
or
DOWN
button to enter the menu and to scroll through the menu.
• Once at the menu item that you want, press the
SELECT
button until the item flashes between the value
and the title. You may have to press the
SELECT
button
more than once to get the item to flash.
• Then press the
UP
or
DOWN
button to change the item.
• Remember to push the
SELECT
button to save the item.
Also remember to set the passcode before any items can be
changed.
• Pressing the
UP
or
DOWN
buttons at the same time
acts as an escape to go back out of the menus.
P/N 0461391A
2-1
Hussmann Corporation • Bridgeton, Missouri 63044-2483 U.S.A.
Safe-NET™
INSTALLATION
Summary of Contents for ARL
Page 43: ...4 28 P N 0461391A MENUS ...