C-OF
When a current/voltage monitor is attached to the
Safe-NET display module, this menu item is used to enter
a calibration value to compensate for hardware tolerances
and to assure accurate recording of Ampere values.
Setting this parameter is done in the VALVE menu. After
navigating to the C-OF submenu item, the display will
cycle between C-OF and the current setting. While the
setting is being displayed, press ENTER on the Hand-
Held device or press the SELECT button on the
Safe-NET display module to allow editing of this value.
When the Safe-NET display module begins flashing the
value, use the UP or DOWN arrow keys on the Hand-
Held device or the UP /DOWN buttons on the Safe-NET
display module to increment or decrement the value to
the desired setting.
Once the desired setting is displayed, press the ENTER
key on the Hand-Held device or the SELECT button on
the Safe-NET display module to store the new value to
NV memory. The display will revert to cycling between
C-OF and the new value.
Note:
Incorrect settings in this value will result in erroneous
current readings.The unit must be reset for the new values
to take effect.
V-OF
When a current/voltage monitor is attached to the
Safe-NET display module, this menu item is used to enter
a calibration value to compensate for hardware tolerances
and to assure accurate recording of Voltage values.
4-42
P/N 0461391A
MENUS
C-OF
Value
– 60
C-OF
C-OF
New Value
– 59
– 58
60
Menu Structure — C-OF
V-OF
Value
– 60
V-OF
V-OF
New Value
– 59
– 58
60
Menu Structure — V-OF
Summary of Contents for ARL
Page 43: ...4 28 P N 0461391A MENUS ...