There are three visible buttons on the left hand
side of the display board
,
as indicated in Figure 2
on Page 1. Although labels are not clear, buttons
can be determined by their location.
The SELECT button is located near the top edge
of the display board. It is used to select the
menus and to edit the menus.
The UP button is the left button of the two
buttons located on the bottom lineup of the
display board. The DOWN is the right button of
the two buttons located on the bottom lineup of
the display board. The UP and DOWN buttons
are used to move within and between menus, and
to increment or decrement values.
Notes:
• The SELECT button is used to scroll through
the following menus:
StUP
– Setup
CLoC
– Clock
dEFr
– Defrost
tEM
– Temperature
uALu
– Valve
diSP
– Display Default
• User must enter valid password to edit
parameter settings.
• To edit any menu item, press either the UP or
DOWN button to enter the selected menu.
• Use the SELECT button to modify and save the
parameter once the UP or DOWN button is
pressed.
• The display cycles between menu item and
edited menu value once the edited value is
entered using the SELECT button, .
• The display returns to showing the product
simulator temperature if no button is pressed for
12 seconds once the menu is displayed. User
must scroll through the menus using the SELECT
button to return to the SETUP menu.
• Holding a button down has the same effect as
pressing once.
PASSWORD
Entering the password is done in the SETUP
menu. At the top of the SETUP menu, press the
UP button. The display will begin to cycle
between PASS and 0.
While 0 is being displayed, press the SELECT
button to allow editing of the value. With the
Safe-NET display module flashing 0, use the UP
/DOWN buttons to increment or decrement the
value until it reaches 595. 595 is the password
value.
Once 595 is displayed, press the SELECT button.
The display will revert to cycling between PASS
and 595. This enables editing of parameters.
The user may now navigate the menu system and
edit parameters as necessary.
3-4
P/N 0461391A
DISPLAY & ALARM MODULES
Summary of Contents for ARL
Page 43: ...4 28 P N 0461391A MENUS ...