After certain parameter changes are completed, the Safe-
NET system must be reset to initiate operation in
accordance with the modified parameter(s). This may be
accomplished in one of two ways. Either navigate to the
RESET sub menu item in the SETUP menu and press the
ENTER key on the Hand-Held device or the SELECT
button on the Safe-NET display,
OR
cycle power to the
Safe-NET system. Parameter changes requiring a RESET
are noted accordingly in the detailed parameter
descriptions.
The individual parameters, associated modification
procedures and preferred practices are discussed in detail
in the following pages. Presentation of the parameters is
in sequence with the menu structure presented on the
previous page.
PASSWORD PROTECTION
Parameters that are critical to proper equipment
performance cannot be modified until a numeric
password is entered into the Safe-NET display module.
This prevents accidental or malicious changes in the Safe-
NET system from occurring.
Entering the password is done in the SETUP menu. At
the top of the SETUP menu, press the UP arrow on the
Hand-Held device or the UP button on the Safe-NET
display module. The display will begin to cycle between
PASS and 0.
While 0 is being displayed, press ENTER on the Hand-
Held device or press the SELECT button on the
Safe-NET display module to allow editing of the value.
With the Safe-NET display module flashing 0, use the UP
or DOWN arrow keys on the Hand-Held device or the UP
/DOWN buttons on the Safe-NET display module to
increment or decrement the value until it reaches 595.
595 is the password value.
4-8
P/N 0461391A
MENUS
Menu Structure — Password
Summary of Contents for ARL
Page 43: ...4 28 P N 0461391A MENUS ...