Display Module
The display module is a slim four-digit binary coded
decimal LED unit which mounts in the case fascia panel.
It lets you check temperatures at a glance and performs a
variety of other monitoring and control functions via
pushbuttons or the hand-held controller.
Up to 10 sensors can be connected to each display
module.
Digital Sensors
Up to 10 digital sensors can be installed in each case with
a single cable connection. There are 14 types of sensors.
Each sensor has an electronic identifier so it can be
recognized by the display module. This eliminates the
need for separate wiring. Sensors in each case are
harnessed together to a single wire leading to the display
module. Sensors are designed for rugged durability.
Should a sensor fail, it can be replaced.
O
Oppttiioonnaall
Wireless Hand-held Controller and/or PC
Control
The wireless controller communicates with the display
unit through an infrared sensor. This allows setups and
queries which can also be performed via PC over the
network.
If the wireless controller is not available, it is possible to
program the controller directly with buttons located on
the display module.
1-2
P/N 0461391A
INTRODUCTION
Safe-NET™ Display Module
Typical Safe-NET™ Sensor Harness
Safe-NET™ Hand Held Controller
Summary of Contents for ARL
Page 43: ...4 28 P N 0461391A MENUS ...