Husqvarna TC 50, Owner'S Manual

Page: 68 / 137

11 SERVICE WORK ON THE CHASSIS
66
K00673-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
–
Pull off the main silencer from the manifold at rubber
sleeve
3
.
11.34 Installing the main silencer
K00673-11
Main work
–
Mount the main silencer with rubber sleeve
1
.
–
Mount the silent block with screw
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the collar bushings.
–
Mount and tighten screw
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the right side cover. ( p. 58)
–
Mount the seat. ( p. 63)
11.35 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
–
Remove the seat. ( p. 63)
–
Remove the right side cover. ( p. 57)
–
Remove the main silencer. ( p. 65)