9 SERVICE SCHEDULE
29
Every 80 operating hours
Every 40 operating hours
Every 20 operating hours
Once after 10 operating hours
Service the fork.
●
●
Service the shock absorber.
●
Check the screws and nuts for tightness.
○
●
●
●
Check idle.
○
●
●
●
Check the clutch setting.
●
●
●
Final check: Check the vehicle for safe operation and take a test ride.
○
●
●
●
Make the service entry in
Husqvarna Motorcycles Dealer.net
and in the Service and War-
ranty Booklet.
○
●
●
●
○
One-time interval
●
Periodic interval
9.3
Recommended work
Annually
Every 80 operating hours
Once after 20 operating hours / Every 20 operating hours
Once after 10 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Service the fork.
○
Service the shock absorber.
○
Grease the steering head bearing.
●
Check/adjust the carburetor components.
●
Perform minor engine service. Check the cylinder and piston. Check the inlet
membrane.)
●
●
Perform major engine service including removing and installing engine. (Check the clutch.
Change the piston. Change the connecting rod, conrod bearing, and crank pin. Check the
transmission. Change the crankshaft bearing. Change all engine bearings.)
●
○
One-time interval
●
Periodic interval
Summary of Contents for TC 50
Page 1: ...OWNER S MANUAL 2018 TC 50 TC 50 Mini Art no 3402161en ...
Page 2: ......