Husqvarna TC 50 Page 34 Owner'S Manual Download

Page: 34 / 137

10 TUNING THE CHASSIS

10.5

Adjusting the high-speed compression damping of the shock absorber

(TC 50)

Caution

Risk of injury

Parts of the shock absorber will fly off if the shock absorber is disassembled incor-

rectly.
The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)

Info

The effect of the high-speed setting can be seen in fast compression of the shock absorber.

F00635-10

–

Push splash protector to the side.

–

Using an open end wrench, turn adjusting screw

clock-

wise all the way.

Info

Do not loosen fitting

–

Turn counterclockwise by the number of turns corresponding
to the shock absorber type.
Guideline

Compression damping, high-speed

Comfort

2.5 turns

Standard

2 turns

Sport

1.5 turns

Info

Turn clockwise to increase damping; turn counter-
clockwise to reduce damping.

–

Position the splash protector.

10.6

Adjusting the rebound damping of the shock absorber

Caution

Risk of injury

Parts of the shock absorber will fly off if the shock absorber is disassembled incor-

rectly.
The shock absorber is filled with highly compressed nitrogen.

–

Please follow the description provided. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)

Summary of Contents for TC 50










































































































































Search results

Summary of Contents for TC 50

Reviews:

Related manuals for TC 50

Brands by name

Popular brands

Husqvarna TC 50, Owner'S Manual

Search results

Summary of Contents for TC 50

Reviews:

Related manuals for TC 50

Brands by name

Popular brands