12 BRAKE SYSTEM
77
Info
Turn the adjusting screw clockwise to increase the
distance between the hand brake lever and the han-
dlebar.
Turn the adjusting screw counterclockwise to
decrease the distance between the hand brake lever
and the handlebar.
The range of adjustment is limited.
K00680-11
–
Position cover
2
. Mount and tighten screw
1
.
12.4
Checking the brake discs
Warning
Danger of accidents
Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized Husqvarna Motor-
cycles workshop will be glad to help.)
A
A
400257-10
–
Check the front and rear brake disc thickness at multiple
points for the dimension
A
.
Info
Wear reduces the thickness of the brake disc around
the contact surface of the brake linings.
Brake discs - wear limits
front
2.2 mm (0.087 in)
rear
2.2 mm (0.087 in)
» If the brake disc thickness is less than the specified value:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Check the front and rear brake discs for damage, cracking,
and deformation.
» If the brake disc exhibits damage, cracking, or deforma-
tion:
–
Change the front brake disc.
–
Change the rear brake disc.
Summary of Contents for TC 50
Page 1: ...OWNER S MANUAL 2018 TC 50 TC 50 Mini Art no 3402161en ...
Page 2: ......
