Husqvarna TC 50, Owner'S Manual

Page: 27 / 137

8 RIDING INSTRUCTIONS
25
8.5 Applying the brakes
Warning
Danger of accidents
Excessively forceful application of the brakes blocks the wheels.
–
Explain to your child that he or she must adapt the braking to the traffic situation and the road con-
ditions.
Warning
Danger of accidents A spongy pressure point on the front or rear brake reduces braking efficiency.
–
Check the brake system and do not allow your child to continue riding until the problem is elimi-
nated. (Your authorized Husqvarna Motorcycles workshop will be glad to help.)
Warning
Danger of accidents
Moisture and dirt impair the brake system.
–
Explain to your child that he or she must brake carefully several times to dry out and remove dirt
from the brake linings and the brake discs.
–
On sandy, wet, or slippery surfaces, use the rear brake.
–
Always finish braking before you go into a bend.
8.6 Stopping, parking
Warning
Risk of misappropriation People who act without authorization endanger themselves and others.
–
Do not leave the vehicle unattended if the engine is running.
–
Protect the vehicle against access by unauthorized persons.
Warning
Danger of burns
Some vehicle components become very hot when the vehicle is operated.
–
Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.
–
Let the vehicle parts cool down before you perform any work on the vehicle.
Note
Material damage
The vehicle may be damaged by incorrect procedure when parking.
Significant damage may be caused if the vehicle rolls away or falls over.
The components for parking the vehicle are designed only for the weight of the vehicle.
–
Park the vehicle on a firm and level surface.
–
Ensure that nobody sits on the vehicle when the vehicle is parked on a stand.
Note
Fire hazard
Hot vehicle components pose a fire hazard and explosion risk.
–
Do not park the vehicle near to materials which are highly flammable or explosive.
–
Allow the vehicle to cool down before covering it.
–
Apply the brakes on the motorcycle.
–
Press and hold the kill switch while the engine is idling until the engine stops.
–
Turn the knurled screw on the fuel tap all the way clockwise.
–
Park the motorcycle on firm ground.