Husqvarna Royale, User Manual

Page: 90 / 144

6 Embroidery Set Up
6:6
&OHDUVXIÀFLHQWVSDFHDURXQGWKHPDFKLQHWR
DFFRPPRGDWHPRYHPHQWRI WKHHPEURLGHU\DUPDQG
ROGWKHQHHGOHWKUHDGDQGWRXFKWKH6WDUW
6WRSEXWWRQRUWKHIRRWFRQWURO7KHPDFKLQHVWDUWV
embroidering.
Note: If Automatic Jump Stitch Trim is not activated the machine
will stop after stitching a few stitches. A pop-up message will appear
on the screen asking you to cut the thread end. Cut the thread and
press Start/Stop to continue embroidering.
:KHQWKHÀUVWFRORULVFRPSOHWHG\RXUPDFKLQHFXWV
WKHWKUHDGHQGDQGVWRSV$SRSXSPHVVDJHDSSHDUV
asking you to change thread color. Re-thread with the
next color and continue embroidering by pressing
6WROGWKHWKUHDGHQG7KHPDFKLQHZLOOWULP
the top thread end and pull the thread to the underside
of the fabric.
$WWKHHQGRI HDFKFRORUEORFNWKHWKUHDGLVWLHGRII
and the needle thread is cut.
8. When the embroidery is completed, your machine
cuts the top thread and bobbin thread and stops. The
needle and presser foot raise automatically for easy
UHPRYDORI WKHKRRS
$SRSXSPHVVDJHDQGVRXQGLQIRUPV\RXWKDW\RXU
HPEURLGHU\LVÀQLVKHG7RXFK2.WRNHHSWKHGHVLJQ
ORDGHGDQGVWD\LQ(PEURLGHU\6WLWFK2XW