Husqvarna Royale, User Manual

Page: 28 / 144

A
B
1 2
4 3
C
D
E
F
G
2:8
2 Set Up
BOBBIN WINDING WHILE
EMBROIDERING OR SEWING
1. Raise the auxiliary spool pin. Place the large spool cap,
felt pad and thread spool on the spool pin.
%ULQJWKHEREELQWKUHDGDURXQGWKH
thread tension
GLVF$DQGWKURXJKWKHWKUHDGJXLGH%DVLOOXVWUDWHG
3. Guide the thread through the hole in the bobbin from
the inside to the outside.
3XVKWKHEREELQZLQGHUOHYHUWRZDUGVWKHEREELQ
WRZLQG$SRSXSPHVVDJHDSSHDUVRQVFUHHQ7R
adjust winding speed drag the slider with your stylus.
6WRSDQGVWDUWWKHEREELQZLQGLQJZLWKWKHRQVFUHHQ
ROGWKHHQGRI WKHWKUHDGÀUPO\ZKHQ
starting to wind.
:KHQWKHEREELQLVIXOOWKHEREELQZLQGHUOHYHUZLOO
PRYHEDFNDQGWKHZLQGLQJZLOOOVWRSDXWRPDWLFDOO\
7KHSRSXSPHVVDJHFORVHV5HPRYHWKHEREELQDQG
cut the thread using the bobbin winding thread cutter.
Note: Make sure that the thread does not touch the cap of the
horizontal spool pin when winding the bobbin. If it does, place the cap
and spool higher on the vertical spool pin.
INSERTING THE BOBBIN
5HPRYHWKHEREELQFRYHUE\VOLGLQJLWWRZDUGV\RX
2. Place the bobbin in the bobbin case. It drops in only
one way with the logo facing up. The thread unreels
from the left of the bobbin. The bobbin will then
rotate counter-clockwise when you pull the thread.
3ODFH\RXUÀQJHURQWKHEREELQWRNHHSLWIURP
WXUQLQJDV\RXSXOOWKHWKUHDGÀUPO\WRWKHULJKWDQG
WKHQWRWKHOHIWLQWRWKHWHQVLRQVSULQJ&XQWLOLW
´FOLFNVµLQWRSODFH
&RQWLQXHWKUHDGLQJDURXQG'DQGWRWKHULJKWRI WKH
WKUHDGFXWWHU(6OLGHRQWKHEREELQFRYHU)3XOO
WKHWKUHDGWRWKHOHIWWRFXW*