Husqvarna Royale, User Manual

Page: 30 / 144

1.
2:10
2 Set Up
5HPRYHWKHSUHVVHUIRRWDQNOHE\XQVFUHZLQJWKHDQNOH
screw.
2. Place the dual feed on your machine from the back,
SRVLWLRQLQJWKHIRUNRYHUWKHQHHGOHFODPSVFUHZ7KHQ
screw the dual feed onto the presser foot bar with the
presser foot ankle screw. Reduce presser foot pressure
to 3.
Snap-on and remove the presser foot
3. With presser foot bar in the up position, place the
presser foot under the dual feed.
4. Push the foot upwards so that it snaps into place.
7RUHPRYHWKHIRRWSXVKWKHIURQWRI WKHIRRW
upwards until the foot snaps off.
Note: Always keep the dual feed with a foot snapped-on when it is
not attached to the machine.
How to attach the guide
The two guides included with the dual feed will help you
sew parallel rows of stitching side by side as in channel
TXLOWLQJRUWXFNLQJ7KHUHLVRQHJXLGHIRUWKHOHIWVLGHDQG
one for the right.
6. Insert the guide into the hole in the back of the dual
feed.
$GMXVWWKHVSDFHEHWZHHQWKHIRRWDQGWKHJXLGHE\
pulling it to the left or to the right.
Note: Look for optional dual feed accessories at your
HUSQVARNA VIKING ® retailer.
CHANGE TO STRAIGHT STITCH
PLATE
$WWDFKWKHVWUDLJKWVWLWFKSODWHZKHQIRUH[DPSOHSLHFLQJ
\RXUTXLOW7KHVPDOOHUKROHLQWKHVWUDLJKWVWLWFKSODWH
VXSSRUWVWKHIDEULFFORVHUWRWKHQHHGOHDQGKHOSVSUHYHQW
the fabric from being pulled down into the bobbin area,
especially at the beginning and/or end of a seam.
5HPRYHWKHSUHVVHUIRRWDQGVOLGHRII WKHEREELQ
FRYHU
2. Make sure that the feed teeth are lowered. Place the
VFUHZGULYHUXQGHUWKHQHHGOHSODWHDVVKRZQLQWKH
SLFWXUHDQGJHQWO\WXUQWKHVFUHZGULYHUWRSRSRII WKH
needle plate.
3. With feed teeth lowered, place the straight stitch plate
VRWKDWLWÀWVLQWRWKHQRWFKDWWKHEDFN'3UHVVWKH
VWUDLJKWVWLWFKSODWHGRZQXQWLOLWFOLFNVLQWRSODFH6OLGH
RQEREELQFRYHU
3.
6.
4.
5.
1.
2.
D
2.
3.