18 SERVICE WORK ON THE ENGINE
104
F00442-11
–
Mount and tighten screw plug
with the short oil screen and the O-rings.
Guideline
Screw plug, oil screen
M20x1.5
15 Nm (11.1 lbf ft)
F00444-10
–
Position long oil screen
with the O-rings on a pin wrench.
–
Position the pin wrench through the drilled hole of the screw plug in the opposite
section of the engine case.
–
Push the oil screen all the way into the engine case.
F00445-10
–
Mount and tighten screw plug
with the O-ring.
Guideline
Screw plug, oil screen
M20x1.5
15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
with the magnet and a new seal ring.
Guideline
Oil drain plug with magnet
M12x1.5
20 Nm (14.8 lbf ft)
F00440-10
–
Remove screws
. Remove the oil filter cover with the O-ring.
F00446-10
–
Pull oil filter
out of the oil filter housing.
Circlip pliers reverse (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surface.
F00440-11
–
Lay the motorcycle on its side and fill the oil filter housing to about
⅓
full with
engine oil.
–
Insert the new oil filter into the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it with the oil filter cover
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
M6
10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
Summary of Contents for FE 450
Page 1: ...OWNER S MANUAL 2017 FE 450 FE 501 Art no 3402103en ...
Page 2: ......
