Husqvarna FE 450 2014, Repair Manual

Page: 88 / 337

10 EXHAUST
86
(FE 501 US)
-
Remove screws
O
of connecting cap
8.
-
Remove connecting cap with the perforated pipe, O-
ring
CD.
and glass fiber yarn filling
e.
-
Remove screws
0
and silencer cap
(D
with O-ring
@.
-
Remove screws
@)
and insert Q) together with insulat-
ing pad�-
-
Remove the insulating pad from the insert.
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new insulating pad on the insert and fasten
with adhesive tape.
-
Position the insert with the insulating pad in outer
tube
a..
-
Mount and tighten screws
@).
Guideline
Screws on the
main silencer
M5
-
Mount O-ring
CD
on the silencer cap.
7 Nm (5.2 lbf ft)
-
Fit the new glass fiber yarn filling onto the perforated
pipe.
-
Fit the connecting cap with the glass fiber yarn filling in
the outer tube.
Info
Press the glass fiber yarn filling into the outer tube
using a blunt tool.
-
Mount and tighten screws
0-
Guideline
Screws on the
main silencer M5
-
Mount O-ring @ on the silencer cap.
7 Nm (5.2 lbf ft)
-
Position the silencer cap with O-ring @ in the outer tube.
-
Mount and tighten screws
0-
Guideline
Screws on the
main silencer
Finishing work
M5
-
Install the main silencer. ( � p. 85)
-
Install the right side cover. ( � p. 91)
7 Nm (5.2 lbf ft)
..