Husqvarna FE 450 2014, Repair Manual

Page: 200 / 337

18 ENGINE
If there is damage or wear:
- Change the clutch facing discs and the clutch basket.
- Check needle bearings
41
and collar bushing
48
for damage and wear.
If there is damage or wear:
- Change the needle bearings and collar bushing.
- Check intermediate clutch discs G) for damage and wear.
If the intermediate clutch discs are not level and are pitted:
- Change all intermediate clutch discs.
- Check clutch facing discs
CD
for discoloration and scoring.
If there is discoloration or scoring:
- Change all clutch facing discs.
- Check the thickness of clutch facing discs
CD.
I
Clutch facing disc - thickness I � 1 .9 mm (� 0.075 in)
If the clutch facing disc does not meet specifications:
- Change all clutch facing discs.
18.4.35 Checking the shift mechanism
e
/\
--�
- Check shift forks
O
at leaf
G
for wear.
Shift fork
J
0
304687-10
Thickness at leaf 4.85 ... 4.95 mm (0.1909 ... 0.1949 in)
If the measured value does not meet specifications:
- Change the shift fork.
- Check shift grooves G) of shift drum @ for wear.
If the shift groove is worn:
- Change the shift drum.
- Check the seat of the shift drum in grooved ball bearing (D.
198
If the shift drum is not correctly seated:
- Change the shift drum and/or the grooved ball bearing.
..