Husqvarna FE 450 2014, Repair Manual

Page: 205 / 337

0 (;) 0 6D
JI
f
1'
Main work
•
I
•• e •
J�
e
J
i
•
I
304685-11
- Secure the countershaft in the bench vise with the toothed end facing downward.
Guideline
I Use soft jaws.
18 ENGINE
- Mount needle bearing
O
and second-gear idler gear
8
onto the countershaft with the protruding collar
facing downward.
- Mount stop disk@) and lock ring
C,.
- Mount the sixth-gear sliding gear
0
with the shift groove facing up.
- Mount lock ring
(D
and stop disk@.
- Mount needle bearing
C,
and the fourth-gear idler gear
@)
with the collar facing up.
- Mount needle bearing Ci) and the third-gear idler gear
48
with the collar facing down.
- Mount stop disk
48
and lock ring G).
- Mount the fifth-gear sliding gear
4D
with the shift groove facing down and stop disk
e.
- Mount needle bearing
Gs,,
first-gear idler gear
49
with the recess facing down, and stop disk G).
- Finally, check all the gear wheels for smooth operation.
18.4.41 Checking the transmission
Condition
The transmission has been disassembled.
203