Instruction book Rose
17
Functions / Infodisplay
Needle stop
This button sets whether the
needle stops up or down in
the material when you lift
your foot from the foot control and
stop sewing. Point the arrow
upwards - the needle will stop in the
up position. When you touch the
button so that the arrow points
downward, the machine will stop
with the needle in the material.
You can also regulate the needle
stop position with the foot control.
To raise or lower the needle after
stopping, lightly tap the foot control.
When sewing embroideries
only the up position can be
used.
All stitches in the machine have a
pre-set maximum speed at which
they can be sewn. When you select
a stitch the machine automatically
sets the correct maximum speed.
High speed
Reverse
Your machine sews backwards
when this button is pressed.
The machine sews forward
when the button is released.
The longest stitch length when
reverse feeding is 3 mm.
For permanent reverse, press the
button twice in quick succession
before starting to sew. An arrow
to the top left on the display
indicates reverse sewing. To sew
forward again, press the button once
more.
The reverse button is also used
when starting and stopping the
Embroidery unit, (the foot
control can also be used)
Sewing speed
Use the
SPEED
button to set
the three different maximum
speeds. The machine will sew
at different maximum speeds when
the foot control is fully depressed.
For slower speeds within the range
simply press the foot control less.
When Embroidery position is
set, only the slowest speed can
be selected.
Reduced speed
Slow speed
Functions
