Instruction book Rose
27
A
B
1.
Raise the presser foot lever.
2.
Unscrew the presser foot ankle.
3.
Place the presser foot U from
behind onto the presser bar. The
arm of the presser foot should be
behind the needle clamp screw.
4.
Push the presser foot upward -
make sure the holes match each
other.
5.
Insert the screw and tighten the
embroidery presser foot.
Changing to the embroidery presser foot
Normal embroidery:
The lever on
the arm of the presser foot should
be turned downward (A). The mark
U on the lever corresponds to the
symbol
on the display.
Quilting or sewing terry cloth:
When selecting a quilt stitch the
symbol
appears on the display.
Turn the lever upward (B). Also
when sewing terry cloth or other
thick fabrics, use setting (B).
Note:
When bobbin winding you
can use the button to start and
stop. See page 12 "Bobbin winding -
vertical spool pin".
Use rayon embroidery thread 40 wt.
When reducing the size of the
embroidery we recommend a finer
thread, 60 wt. When enlarging, we
recommend a thicker thread, 30 wt.
Place the net over the thread spool,
especially when using rayon thread.
Use a very fine thread as bobbin
thread. There is a special bobbin
thread called darning cotton or
basting thread available for this kind
of embroideries.
Thread
Embr
oider
y
!
Switch off the main switch.