Instruction book Rose
55
Maintenance
Changing the light bulb
!
Switch off the main switch.he
light bulb is placed to the left of the
needle. Place the rubber sheath
found in the accessory box with its
deep hole around the bulb. Do not
turn the bulb, just pull it down to
remove the bulb.
When inserting, place the rubber
sheath with its shallow hole around
the new bulb, insert the bulb by
pushing it up.
Use light bulb designed as indicated
on the front of the machine.
Replacing the stitch plate
Replace the stitch plate about 5 mm
in front of the rear edge and push it
backward. Replace the bobbin
cover.
Care of the machine
To keep your sewing machine
operating satisfactorily, it requires,
like other precision machines,
regular cleaning. No lubrication
(oiling) is needed.
Removing the stitch plate
!
Switch off the main switch.
Remove the presser foot and the
bobbin cover. Lower the feed teeth.
Place the stitch plate opener on the
brush. There is a recess at the rear
of the stitch plate. Insert the stitch
plate opener at the recess and turn.
Maintenance
Cleaning
When necessary, the feed teeth and
the bottom of the bobbin area must
be cleaned with the brush, which
you will find with the accessories
