Instruction book Rose
9
Spool pin
The machine has spool pins suitable
for all types of thread. The main
spool pin (a) is horizontal - the
thread reels off the stationary spool.
Place the spool so that the thread
reels counter-clockwise.
There are two spool holders on the
spool pin. With narrow thread
spools, the small holder (b) is
placed in front of the thread. If you
use large thread spools, the large
holder (c) is placed in front of the
thread.
Slide the correct size spool holder in
place so the flat side is pressed
firmly against the spool. No space
between spool holder and spool.
There is also a separate spool pin
(d) to be attached onto the machine.
The fingers on the extra spool pin fit
into the two holes to the right of the
fixed spool pin. Push downward to
snap in place.
The large spool holder (c) is placed
under the thread. This spool pin is
used when winding a bobbin from a
second spool of thread or for a
second spool when sewing with a
twin needle.
a
b
d
d
c
c
Pr
ocedur
es
