Huntleigh Smartsigns Liteplus, Instructions For Use Manual, Page: 8 / 92

8
2. Introduction
WARNING: The Smartsigns ® Liteplus is intended only as an adjunct in
patient assessment. It must be used in conjunction with clinical signs and
symptoms.
This manual contains information about the Smartsigns ® Liteplus vital signs monitor. The
Smartsigns ® Liteplus is available in the following con fi gurations:
Confi g. Features
NB Standard (NIBP + Pulse Rate + Ni-MH Battery)
NSB St SpO
2
NTB St Temperature
NSTB St SpO
2
+ Temperature
NPB St Printer
NSPB St SpO
2
+ Printer
NTPB St Temp Printer
NSTPB St SpO
2
+ Tempe Printer
Note: Refer to Speci fi cation Section for more information about each con fi guration.
All information in this manual, including the illustrations, are based on a monitor
confi gured with the NIBP, Temperature, SpO
2
, and Printer options. If your monitor
confi guration lacks any of these options, certain information in this manual does
not apply.
2.1 Features of the Smartsigns
®
Liteplus
Physical
The Smartsigns
®
Liteplus vital signs monitor is a lightweight and compact vital signs
monitor measuring 130×180×284 (mm) (H×D×W) and weighing 2.7 kg. Its carrying handle
is designed for instrument transport while battery-powered monitoring.
Electrical
The monitor is powered by a Ni-MH type of internal battery pack. The batteries are
continuously recharged when AC power (100-240 VAC, 50-60 Hz) is connected to the
monitor. Details are described in the Battery Operation section.
Intr
oduction