48
9.3 Temperature Measurement Modes
Temperature measurements can be made in two modes:
• PREDICTIVE
mode
is a one-time measurement that takes only a few seconds. It results in a single
temperature reading which is displayed at the end of the brief measurement period.
• MONITORED
mode
is a continuous measurement over an inde
fi
nite period. The current temperature displayed
dynamically throughout the measurement period.
9.4 Description of Temperature Operation
Setting the Temperature Measurement Mode
For the setting the Temperature measurement mode, refer to section 6.6 of this manual.
1. Press the Mode button until the Temperature units and modes are on (a
selected unit/mode is shown
fl
ashing).
2. Select desired temperature unit and mode, using the Up/Down (+/-) selection
buttons.
Note: If there is no activity for 3 seconds, the monitor will return to normal operation.
Table 7. Indication of Temperature Measurement Mode
Indication
Temperature Mode
Celsius Predictive
Celsius Monitored
Fahrenheit Predictive
Fahrenheit Monitored
Temper
atur
e Monitoring
Summary of Contents for Smartsigns Liteplus
Page 1: ......