30
6.6 Setting Temperature Units and Modes
This procedure will allow you to set temperature type and measurement units, providing
the monitor has the temperature option. You can display the temperature measurement in
either Celsius (°C) or Fahrenheit (°F). Also you may select whether to use Monitor mode
or Predictive mode for taking temperatures. For more information, refer to Temperature
Monitoring section of this manual.
With the monitor in the normal monitoring mode:
1. Press the Mode button until the Temperature units and modes are on (a
selected unit/mode is shown
fl
ashing).
2. Select desired temperature unit and mode, using the Up/Down (+/-) selection
buttons.
Fahrenheit Predictive (°F)
Fahrenheit Monitored (°F M)
Celsius Predictive (°C)
Celsius Monitored (°C M)
3. Press any other button to return to normal operation. If there is no activity for
3 seconds, the monitor will return to normal operation.
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
°F
°C
M
Figure 12. Temperature Units and Modes Setting
Using the Monitor
Summary of Contents for Smartsigns Liteplus
Page 1: ......