59
Pulse Rate Alarm Limits
Alarm Limits determine the high and low points of patient data at which the monitor will
sound an alarm.
With the monitor in the normal monitoring mode:
1. Press the Alarm button until Pulse rate high alarm limit is displayed.
2. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as
needed to change the limit to another value.
3. Press the Alarm button once again until Pulse rate low alarm limit is
displayed.
4. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as
needed to change the limit to another value.
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
Figure 36. Pulse Rate High Alarm Limit Setting
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
Figure 37. Pulse Rate Low Alarm Limit Setting
Alar
ms and Limits
Summary of Contents for Smartsigns Liteplus
Page 1: ......