Huntleigh Smartsigns Liteplus, Instructions For Use Manual, Page: 29 / 92

29
6.5 Setting NIBP Units
This procedure will allow you to select a NIBP measurement unit either mmHg or kPa.
With the monitor in the normal monitoring mode:
1. Press and hold the Mode button for 3 seconds or more until the monitor enters
Con fi guration mode. Once the monitor is in the Con fi guration mode, current
NIBP unit is fl ashing on the display.
2. Select a NIBP unit either mmHg or kPa, using the Up/Down (+/-) selection
buttons.
3. Press any other button to return to normal operation. If there is no activity for
3 seconds, the monitor will return to normal operation.
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
mmHg
kPa
mmHg
kPa
Figure 11. NIBP Units Setting
Using the Monitor