Huntleigh Smartsigns Liteplus, Instructions For Use Manual, Page: 16 / 92

16
3.4 Description of Controls
Table 2. Controls
Controls Description
Power Button
turns the monitor on or off when pressed for over 1 second.
NIBP start/stop button
initiates NIBP measurement when pressed. If the NIBP start/stop button is
pressed again during the measurement, it will cancel the current reading.
Alarm Silence Button
allows you to silence a patient alarm temporarily and also is used to
acknowledge (cancel) other non-patient alarms.
Up/Down Selection Buttons
allows you to select items within a particular settable feature in several
different modes. If the Up or Down selection button is pressed and held,
the unit will scroll through the available selections as if the button is being
pressed repeatedly while the button is held in.
Print Button (Option)
sends the data to the printer and prints current onscreen readings if a
printer is installed in the monitor. Pressing the Print button during print-out
stops printing.
Review Button
allows the user to review or to erase measurement data in the memory.
If pressed and held for more than 3 seconds, the monitor will erase the
data.
Auto Button
puts the monitor in Auto interval selection mode, allowing the user to take
automatic blood pressures at a selected increment.
Alarm Button
puts the monitor into Alarm Set mode, allowing the user to set alarm limits
for Systolic, Diastolic, MAP, Pulse rate and SpO
2
.
Mode Button
puts the monitor into the Settings or Con fi guration mode. Once the
monitor is in one of these modes, the Mode button will be used to cycle
through the con
fi guration options of the speci fi c menu mode.
Description of
Contr
ols, Indica
tor
s, Symbols and Displays