manualshive.com logo in svg

Huntleigh Smartsigns Liteplus, Instructions For Use Manual, Page: 72 / 92

Share
Download
Huntleigh Smartsigns Liteplus Instructions For Use Manual Download Page 72

72

14. Maintenance

WARNING: Only qualifi ed service personnel should remove the cover. 
There are no internal user-serviceable parts.

WARNING: Do not spray, pour, or spill any liquid on the monitor, its 
accessories, connectors, switches, or openings in the chassis.

 

CAUTION: Unplug the power cord from the monitor before cleaning the monitor.

14.1   

General

Follow local governing ordinance and recycling instructions regarding the disposal 
or recycling of end of life use of Smartsigns

®

 Liteplus and accessories. Otherwise 

environment or people may be harmed from improper disposal of battery or accessories.

14.2   

Returning the Smartsigns

®

 Liteplus and  

         

System  Components

Contact Huntleigh Healthcare Ltd Technical Services Department for shipping instructions 
including a Returned Goods Authorization (RGA) number. Pack the Smartsigns

®

 Liteplus 

monitor with sensors, cables or other accessory items in its original shipping carton. If the 
original carton is not available, use a suitable carton with appropriate packing material 
to protect the monitor during shipping. Return the  Smartsigns

®

 Liteplus by any shipping 

method that provides proof of delivery.

14.3   

Service

The  Smartsigns

®

 Liteplus requires no routine service other than cleaning or battery 

maintenance that is mandated by the user’s institution. For more information, refer to  
Smartsigns

®

 Liteplus service manual. Quali

fi

 ed service personnel in the user’s institution 

should perform periodic inspections of the monitor. If service is necessary, contact 
quali

fi

 ed service personnel or Huntleigh Healthcare Ltd Technical Services Department.

If the institution’s service personnel cannot correct problems, the Smartsigns

®

 Liteplus 

should be returned to Huntleigh Healthcare Ltd for service. Contact Huntleigh Healthcare 
Ltd Technical Services Department for return instructions.

14.4   

Periodic Safety Checks

It is recommended that the following checks be performed every 24 months.

 

• 

  Inspect the equipment for mechanical and functional damage.

 

• 

  Inspect the safety relevant labels for legibility.

Maintenance

Summary of Contents for Smartsigns Liteplus





























































































Reviews:

No comments