60
SpO
2
Alarm Limits
Alarm Limits determine the high and low points of patient data at which the monitor will
sound an alarm.
With the monitor in the normal monitoring mode:
1. Press the Alarm button until SpO
2
high alarm limit is displayed.
2. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as
needed to change the limit to another value.
3. Press the Alarm button once again until SpO
2
low alarm limit is displayed.
4. Leave the limit unchanged or press the Up/Down (+/-) selection buttons as
needed to change the limit to another value.
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
Figure 38. SpO
2
High Alarm Limit Setting
SYS
DIA
MAP
%SpO
2
/min
°F
°C
M
mmHg
kPa
BP
1
SYS
DIA
MAP
%SpO
2
/min
Figure 39. SpO
2
Low Alarm Limit Setting
Alar
ms and Limits
Summary of Contents for Smartsigns Liteplus
Page 1: ......