HunterLab ColorFlex EZ Citrus, User Manual

Page: 36 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
36
Figure 61. Setups Locked
AutoSave
Choose YES to save each measurement automatically to the instrument’s Datalog. Choose NO
to save the measurements manually, only on demand. Each press of the RIGHT ARROW button
toggles between YES and NO .
Figure 62. AutoSave
Stdz Interval
Indicate the amount of time that must elapse (in hours) after the last standardization and
before the instrument prompts for re-standardization. Press the
RIGHT ARROW button to
increase the number of hours or the LEFT ARROW button to decrease the number. Values
between 1 and 16 may be selected in increments of 1. Selecting 4 is suggested. The choice of
OFF disables prompting for standardization, but its use is not recommended.
Figure 63. Standardization Interval
AutoSearch

One of the features of the ColorFlex EZ Citrus is that it can find the closest physical, numeric, or
hitch standard stored in the instrument’s memory to a sample read.
When AUTOSEARCH is highlighted and the RIGHT ARROW button is pressed, a submenu
appears. In this submenu, the following parameters may be set: