HunterLab ColorFlex EZ Citrus, User Manual

Page: 32 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
32
Print One Setup

Print One Setup first gives a screen to select the product setup to print. Select the desired setup
from the list by moving the cursor highlight to its position using the
UP and DOWN ARROW
buttons and then pressing the GO (Print) button. The product setup’s parameters are then
output through the USB port. If the USB cable is connected to a printer, the parameters will be
printed. If the cable is connected to a computer or other device, it will be sent there.
Figure 52. Print One Setup
Note: Open a receiving device in order to output setup parameters to a computer.
An example printout is shown.
Figure 53. Printout
Clone All Setups

CLONE ALL SETUPS appears in the Setup Maintenance menu only when two ColorFlex EZ Citrus
instruments are connected together via the standard ColorFlex EZ Citrus USB cable and a
Standard-A to Mini-A adapter. When
CLONE ALL SETUPS is chosen on one of the ColorFlex EZ
Citrus units, the full set of 100 product setups are sent from the initiating instrument to the
second connected instrument. This process takes several minutes. Press
CANCEL to stop the
setup cloning while it is in progress.