HunterLab ColorFlex EZ Citrus, User Manual

Page: 41 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
41
11.
Press VIEW AVG ( GO ) to show the average of all the measurements made in the
averaging sequence.
Note: If a bar code reader is installed, scan the bar code now, and the ID will appear
beneath the average color values.
12.
Press READ (Go button) to take another reading in this product setup.
13.
Once the average is displayed, press VIEW STDDEV (right arrow) to show the
standard deviation of all the measurements made in the averaging sequence.
Working with Saved Readings
Readings stored in the ColorFlex EZ Citrus ’s memory during the read process may be viewed,
printed, and deleted later, if desired.
Figure 73. Select Saved Readings
To work with saved readings, select SAVED READINGS from the main menu by moving the
cursor highlight to its position using the UP and DOWN ARROW buttons and then pressing the
center GO button. The Saved Readings menu appears.
Choose the desired function by scrolling using the UP and DOWN ARROW buttons until it is
highlighted and then pressing the RIGHT ARROW button. The various functions perform as
described below.
Delete All Readings 
DELETE ALL READINGS displays confirmation message to proceed. When GO is pressed, the
measurements stored in the ColorFlex EZ Citrus ’s memory are erased. When complete, a
confirmation message is shown and the user is returned to the SAVED READINGS menu.
Figure 74. Delete All Readings