HunterLab ColorFlex EZ Citrus, User Manual

Page: 55 / 66

ColorFlex EZ Citrus Citrus User’s Manual Version 2.0
55
Options and Sample Devices
There are many options and devices available for positioning samples at the measurement port
of the ColorFlex EZ Citrus and for making the instrument easier to use. Any of the following
options and sample devices may be purchased for use with the ColorFlex EZ Citrus. HunterLab
part numbers are provided for convenience in ordering.
•
Carrying case (D02-1010-619),
•
External serial printer (A12-1014-259),
•
Keyboard (A13-1014-294)
•
Barcode Scanner (A13-1014-254)
•
Spare OJ4 standard, uncalibrated (A11-1011-509), also available with USDA
calibration for an additional fee,
•
Set of 6 OJ standards [OJ1-OJ6], uncalibrated (A11-1011-510), also available with
USDA calibration for additional fee,
•
EasyMatch QC Software with Citrus Option (EZMQC-CFLX)
•
Port inserts (various part numbers),
•
1.25-inch glass port insert (02-6624-05),
•
1.25-inch UV port insert (D02-1010-618),
•
Sample cup set for translucent liquids (CFLX-SC-ASSY for 45/0),
•
Sample cup port plate for 45/0 (04-6622-00),
•
2.5-inch glass sample cup (04-7209-00),
•
Sample cup opaque cover (04-4000-00),
•
Ring and disk set (02-4579-00).
External Printer
The external thermal printer (A13-1014-259) connects to the ColorFlex EZ Citrus ’s USB port and
prints measurement data or product setup parameters on request. The communications cable
supplied with the printer must be used to connect the printer to the ColorFlex EZ Citrus. More
information on the external printer is provided in its separate Printer Manual.
Figure 87. Thermal Printer
The printer is automatically detected by the ColorFlex EZ Citrus once connected.