46
VALANCE AND HANDLE(S) ATTACHMENT
Valance
Return
Valance
Corner
End Cap
Valance
(Front Of
Shade)
Back
Prongs
Sydney (Aluminum) Valance
Attach The Valance Clips To The Valance
Attach the valance clips to the valance
as shown.
On wider shades:
Lay the two pieces of the valance on
a flat surface and butt together.
Attach a valance clip at the seam to
hold the two valances together.
Assemble The Returns Onto The Valance
Outside mounts and non-flush inside
mounts only:
Attach the valance return
and the valance corner end cap to each
end of the valance.
Attach The Valance To The Headrail
Keep a minimum of 3" between
the end of the headrail and the
valance clips. Be sure to avoid areas
where the headrail attaches to the
mounting brackets.
Slide the valance clip under the back
lip of the headrail.
Rotate the valance down to snap the
clips into place on the headrail.
TIP:
Tap the valance at each clip to
assure each clip is attached to
the headrail.
■
■
-
■
■
■
■
■
Summary of Contents for Vertiglide Applause Honeycomb
