HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 15 / 52

15
Front Of
Headrail
(Left Stack
Illustrated)
End Plate
Install the cord tensioner.
Unwind the cord and spring from
the right end plate.
Slide the cord tensioner into
the channel at the front of
the headrail.
Attach the right end plate.
NOTE:
You will adjust the cord
tensioner later.
Split Stack
Remove the left end plate from
the headrail.
Insert the center pull plate in the
center channel and screw in at the
center point of the headrail. (The
illustration at right references the
placement of the center pull plate
in the center groove. It still needs
to be centered in the headrail
before screwing down.)
5.
1.
2.
3.
1.
2.
Cord
Tensioner
Spring
Front
Of
Top Rail
End
Plate