HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 50 / 52

50
The installation brackets do
not allow enough clearance for
the shade (to clear moldings or
window cranks).
TROUBLESHOOTING PROCEDURES
Problem Symptom/Solution
If the shade does not slide with ease, you
may need to adjust the cord tension.
Slide the cord tensioner away from the
fabric stack slightly to decrease
the tension.
Check that the cord is not pinched.
■
■
The shade does not stay
in position.
The shade binds or moves
with difficulty.
If the shade does not stay in position,
you may need to adjust the cord tension.
Slide the cord tensioner toward the
fabric stack slightly to increase
the tension.
■
The shade is not vertically aligned.
Adjust the screws on the moving rail.
To move the bottom of the rail to the
right, loosen the left screw 1 /
2
turn and
tighten the right screw 1 /
2
turn. To move
the bottom of the moving rail to the left,
reverse the process and loosen the right
screw as you tighten the left.
■
Use an extension bracket or spacer
blocks for mounting each installation
bracket to allow adequate clearance for
your shade.
■
On inside or ceiling mount
applications, there isn’t enough
room above the mounted
installation brackets to angle and
attach the headrail and/or
the valance.
Use a shim added to each installation
bracket to provide additional space to
attach the headrail and/or valance.
■