45
Adjust The Vertical Alignment
Check to see if the vertical rail is aligned.
If not, locate the adjusting lever on the
moving rail bracket.
TIP:
When adjusting the moving
rail, it is much easier to adjust if the
cord tension is minimal. To fine-tune
the adjustments, do not loosen the
tension. Loosen the tension to make
large angle adjustments only.
To Adjust The Bottom End Of The Moving
Rail To The Right:
Loosen the left screw
1
/
2
turn, then
tighten the right screw
1
/
2
turn. Repeat
until the shade is properly aligned.
After adjustment, tighten both
screws completely.
To Adjust The Bottom Of The Moving Rail
To The Left:
Loosen the right screw
1
/
2
turn, then
tighten the left screw
1
/
2
turn. Repeat
until the shade is properly aligned.
After adjustment, tighten both
screws completely.
■
■
■
■
Summary of Contents for Vertiglide Applause Honeycomb
