HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 51 / 52

51
A fabric carrier needs to
be reattached.
Place each carrier between a pair of
fabric cells.
Align the
hole in
the fabric
carrier with
the hole in the
fabric cells.
Snap the carrier closed by pinching the
two pieces of the carrier together from
top to bottom.
■
■
■
Fabric Carrier
The cord tensioner does not lock
into place.
Using a small 1 /
8
" flat blade screwdriver,
scrape the paint from the inside of the
channel used for the cord tensioner.
Place a valance bracket up against
the cord tensioner to act as a stop
preventing the tensioner from sliding.
■
■
The moving rail does not align
with the stationary rail. The fabric
seems to bow toward (or away)
from the window.
Take the moving rail (with center stack
and split stack, take both moving rails)
and gently move it toward the window,
then away from the window, then back
into the correct position. The fabric
should align to this correct position.
■