HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 37 / 52

37
Side Stack (Left And Right)
And Split Stack
Gather all the rails and fabric and slide
the rollers of the moving rail bracket
onto the rear track of the headrail.
Slide the rail clips onto the appropriate
groove in the front track.
3 /
4
" fabric – back groove
1 1 /
4
" fabric – front groove
Install the stationary rail.
The stationary rail bracket has two
slots at the top. The back tracks of
the headrail fit into these slots.
Insert the bracket into the back track
of the headrail as shown. Twist the
rail 90º to lock it in place.
Make sure the bracket aligns with
the end of the headrail.
NOTE:
It may be necessary to use
a screwdriver and mallet to move the
bracket to the end of the headrail.
3.
4.
-
-
5.
-
-
-
1 1 /
4
" Fabric
Front Groove
3 /
4
" Fabric
Back Groove