47
Stratford (Alternative Wood) Valance
Attach The Valance Clips To The Headrail
Slide the the valance clip under the
back lip of the headrail.
Rotate the valance down to snap the
clips into place on the headrail.
Keep a minimum of 3" between the end
of the headrail and the valance clips.
NOTE:
Be sure to avoid areas
where the headrail attaches to the
mounting brackets.
Attach The Valance Corner
Brackets To The Valance
Outside mounts and non-flush inside mounts
only:
First snap the valance corner brackets
onto the valance front as shown. Next,
snap the valance return onto the valance
corner brackets.
Headrail widths over 168": Lay the two
pieces of the valance on a flat surface and
butt together.
Insert the top edge of a dovetail bracket
into the top groove over the separation
point. Push up on the bracket to
compress the tab, then push down to
snap the bracket into place in
the groove.
Repeat with the second dovetail bracket
in the bottom groove.
Align the dovetail bracket so the long tab
of the bracket is down.
Place the top tooth of the dovetail bracket
into the top groove on the valance. Snap
the bracket down into place.
For wider shades: Align a valance bracket
on the headrail to connect with the
dovetail brackets at each seam.
■
■
■
■
■
-
-
■
■
■
Valance Corner
Bracket
Valance
Front
Valance
Return
Top, Front
Of Valance
Long Tab Of The
Dovetail Bracket
Front Of
Valance
Long
Tabs
Front Of
Valance
Place The Long Tab Of
The Bracket Toward
The Center Of The Valance
Summary of Contents for Vertiglide Applause Honeycomb
