HunterDouglas Vertiglide Applause Honeycomb Installation And Care Instructions Download Page 35 | Manualshive

Page: 35 / 52

background image

35

Install The Moving Rail Bracket

Side Stack (Left And Right)

Insert the moving

rail bracket into

the moving rail.

If attached, remove the snap pin

located in the moving rail.
Slide the moving rail bracket into the

moving rail.
Replace the snap pin through both

the moving rail and the moving

rail bracket.

Center Stack

Insert both moving rail brackets

into the moving rails.

Remove both snap pins located in each

moving rail.
Slide the moving rail bracket into the

moving rail.
Replace the snap pins through both

the moving rail and the moving

rail bracket.

Split Stack

Insert both moving rail

brackets into the moving rails

(as shown above).

Remove both snap pins located in each

moving rail.
Slide the moving rail bracket into the

moving rail.
Replace the snap pins through

both the moving rail and the

moving rail bracket.

■

■

■

■

■

■

■

■

■

«
...
33
34
35
36
37
...
»

Summary of Contents for Vertiglide Applause Honeycomb





















































Reviews:

No comments

Related manuals for Vertiglide Applause Honeycomb

Brand: Unique Furniture Pages: 6

Brand: Hammerbacher Pages: 40

Brand: Backyard Discovery Pages: 37

Brand: Cabinets by Hayley Pages: 10

Brand: Baxton Studio Pages: 5

Brand: Courtyard Creations Pages: 2

Brand: Original Steifensand Pages: 16

PALADIN 0777201

Brand: XROCKER Pages: 10

Brand: WASAGUN Pages: 42

KENDARA BH18-021-199-21

Brand: Better Homes and Gardens Pages: 22

Brand: norix Pages: 2

Brand: VITRA Pages: 2

LEGACY A414025109

Brand: Broyhill Pages: 7

Brand: Itatiaia Pages: 2

Brand: WIEMANN Pages: 3

Brand: Officeworks Pages: 9

Brand: Jet-Line group Pages: 10

PARENTESI CS/4027

Brand: calligaris Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands