HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 30 / 52

30
Attach The Fabric Clips To The Rail Clips In The Headrail
Side Stack (Left And Right), Split Stack, And Center Stack
Insert the top of each fabric clip into the
corresponding rail clip (located in the
headrail).
NOTE: For split stack shades, repeat this
step for the right fabric panel.
Center Stack Shades
Center stack shades have no
stationary rails. Go to page
43 for Final Adjustments.
Verify The Stationary Rail Is Flush
Against the End Plate
The stationary rail must be flush
against the stationary rail end plate.
If necessary, place the tip of a screwdriver
against the top of the bracket and tap it
gently with a hammer.