CARE
37
Removing the Shading
■
Fully raise the shading.
■
Disconnect the power source from the power cable at the
back of the shading.
■
Move each lever of the installation brackets to the left to
release the shading.
CAUTION:
A flat blade screwdriver can be used to move
the lever. Be very careful not to tear or damage the fabric.
■
Carefully pull the headrail to completely remove the
shading from the brackets.
Cleaning Procedures
Silhouette
®
Window Shadings are made of 100% polyester, which means they are inherently
durable and resilient. However, care must be taken to avoid wrinkling the fabric, particularly
where the vanes meet the facings.
Cleaning the Palette
®
Fabric-Covered Headrail
■
Spot-clean the headrail using a sponge or delicate cloth, cool distilled water and a mild
soap solution; handle with care as you would any fine fabric.
Cleaning the Front Silhouette Shading
Dusting
■
Regular light dusting with a feather duster is all the cleaning needed in most circumstances.
Vacuuming
■
Use a low suction, hand-held vacuum for more thorough dust removal.
Forced Air
■
Blow away dirt and debris between the vanes using clean compressed air.
Spot-Cleaning
Do not spot-clean anything other than the Palette
®
fabric-covered headrail.
Ultrasonic Cleaning
Silhouette
®
Window Shadings can be ultrasonically cleaned by a professional,
with the
exception of Brio
™
, ClearView
™
Originale
™
, ClearView Tapestry
™
, India Silk
™
, The
Matisse Collection
®
, and Mystere
™
.
■
Specify that a mild detergent solution be used.
■
Never immerse the headrail in the solution.
■
Dry the shading completely in the lowered position.
Move the lever to the left
to release the shading.
Top View
Summary of Contents for Silhouette DuoLite
Page 43: ......
