INSTALLATION
16
UltraGlide
®
Only — Attach the Wand
The wand must be securely attached to the shading for proper operation.
■
Remove the orange shipping clip.
➤
Grab the edge of the shipping clip and pull straight down.
■
Remove the wand from its packaging.
■
Gently pull out the bumper and threaded connector until
it is visible.
■
Slide the bumper away from the threaded connection.
CAUTION:
Do not grip the bumper on top of the
connector and attempt to screw on the wand at this
point. Secure attachment of the wand cannot be
guaranteed if tightened by hand.
■
Hold the threaded connector with a
5
⁄
16
(8mm) open
end wrench, and screw the hollow end of the wand
onto the threaded connector, as shown. If necessary,
pliers can be used instead of a wrench.
➤
Continue to firmly rotate the wand until you feel it
click two times and the wand stops moving. This
ensures the wand is securely attached.
CAUTION:
If the wand is not properly secured, it
will come loose after repeated use.
Bumper
Connector
Summary of Contents for Silhouette DuoLite
Page 43: ......
