OPERATION
20
SoftTouch
®
Motorization
Each push up and release of the wand, or pull down and release of the wand, will initiate one
of three shading movements, in sequential order. See Basic Operation below.
Basic Operation
To Open the Shading
■
Push the wand up and release, to sequentially move the
front shading/vanes/back panel in the up/open direction.
With the shading in the fully lowered position, vanes fully
open, and the rear shade fully lowered:
1. Push up and release. The rear shade moves to the fully
raised position.
2. Push up and release. The vanes close.
3. Push up and release. The front shading moves to the
fully raised position.
To Close the Shading
■
Pull the wand down and release, to sequentially move
the front shading/vanes/rear shade in the down/closed
direction. With the shading in the fully raised position:
1. Pull down and release. The front shading moves to the
fully lowered position with vanes closed.
2. Pull down and release. The vanes open.
3. Pull down and release. The rear shade moves to the
fully lowered position.
To Operate the Vanes
NOTE:
The front shading must be fully lowered and the rear shade fully raised.
■
To move the vanes to the fully open position, pull the wand down and release.
■
To move the vanes to the fully closed position, push the wand up and release.
To Operate the Rear Shade
NOTE:
The front shading must be fully lowered and the vanes fully open.
■
To lower the rear shade, pull the wand down and release.
■
To raise the rear shade, push the wand up and release.
To Stop the Shading
■
While the shading is in motion, pull down (or push up) the wand and release to stop
shading or vane movement anywhere along its travel.
Close
Vanes
Raise
Shadings
Lower
Shading
Open
Vanes
Summary of Contents for Silhouette DuoLite
Page 43: ......
