INSTALLATION
13
Headrail-Mounted Rechargeable Battery Wand
Insert the Rechargeable Battery Wand into the Battery Mount
NOTE:
The rechargeable battery wand ships fully charged, so it is ready to install out of the
package.
■
Match the direction of
the arrow on the
underside of the
battery wand with the
arrow on the battery
mount.
■
Insert the nose of the
battery wand into the
cavity of the battery
mount.
■
Push the battery wand flush into the mount until the battery snaps into place.
CAUTION:
Failing to insert wand properly may cause it to fall out of the mount, posing
an injury risk and potentially damaging the wand. Additionally, when mounting on a door,
closing the door with excess force may cause battery wand to dislodge from the mount,
also posing an injury risk and possibly damaging the wand.
SoftTouch
®
Shading: Proceed to “SoftTouch Only — Unpack the Wand and
Attach to Activation Arm”on page 17.
Powerview
®
Shadings: Proceed to “Operate the Shading” on page 18.
Satellite-Mounted Rechargeable Battery Wand
Install the Rechargeable Battery Mount
■
Decide where you want to install the rechargeable battery mount. This may be mounted
behind the headrail, or in any desired location near the window covering.A satellite
battery mount may be installed in any orientation.
➤
Make sure the provided cable is long enough to connect the satellite battery mount
and the shading.
CAUTION:
The rear of the battery mount must be flush against a flat mounting surface.
Do not install on a curved molding.
2"
Power
Socket
End
Allow 2" at power socket end for the extension cable jack.
Minimum flat mounting area = 15" x 1
1
⁄
4
"
13"
15" Minimum Mounting Length
1"
Summary of Contents for Silhouette DuoLite
Page 43: ......
