INSTALLATION
12
Satellite Battery Pack
Mount the Satellite Battery Pack
■
Decide where you want to attach the wall mount bracket for
the satellite battery pack. It may be installed in any orientation.
■
Mark the screw holes and drill them using a
3
⁄
32
" drill bit.
■
Remove the backing from the double-sided tape on the wall
mount bracket. Press the bracket into place.
■
Attach the brackets using the screws provided.
■
Position the battery wand so the power cable can easily be connected to the socket and
snap the wand into the bracket.
■
Install the cover with the slot aligned to the socket in the battery wand.
■
Plug the power cable from the shading into an extension cable.
■
Plug the other end of the extension cable into the socket in the battery wand.
SoftTouch
®
Shading: Proceed to “SoftTouch Only — Unpack the Wand and
Attach to Activation Arm”on page 17.
Powerview
®
Shadings: Proceed to “Operate the Shading” on page 18.
Wall Mount Bracket
Socket
Battery Wand Cover
Slot
Socket
Battery Wand Cover
Extension
Cable
Power Cable from Shading
Summary of Contents for Silhouette DuoLite
Page 43: ......
