Humminbird HELIX 5 G2 SERIES Operation Manual Download Page 112

Page: 112 / 215

112

Screen Snapshots and Recordings

Adjust Playback Speed

X-Press Menu:

From any view, press the MENU key once.

2. Select Playback Speed.

3. Press the RIGHT or LEFT keys to adjust playback speed or pause.

Stop Playback

X-Press Menu:

From any view, press the MENU key once.

2. Select Stop Playback. Press the RIGHT Cursor key.

Delete a Recording

1. Display the Screen Snapshot and Recording View on-screen.

Select a Recording:

Press the UP or DOWN Cursor keys to scroll through the saved ﬁles.

3. Press the MENU key.

4. Select Delete Recording. Press the RIGHT Cursor key.

Delete all Saved Recordings

1. Display the Screen Snapshot and Recording View on-screen.

2. Press the MENU key.

3. Select Delete All Recordings. Press the RIGHT Cursor key.

Adjusting the Playback Speed

indicates Playback

is in progress

Side Imaging

recording playing

Summary of Contents for HELIX 5 G2 SERIES
























































































































































































































Search results

Summary of Contents for HELIX 5 G2 SERIES

Reviews:

Related manuals for HELIX 5 G2 SERIES

Brands by name

Popular brands

Humminbird HELIX 5 G2 SERIES, Operation Manual

Search results

Summary of Contents for HELIX 5 G2 SERIES

Reviews:

Related manuals for HELIX 5 G2 SERIES

Brands by name

Popular brands